Page 6 of 19 M7998 Issue 2.3
Do not
immerse any part of this equipment in water / fluid.
Do not
spill substances onto any part of the Reaction Station or
Clarity system. If spillage does occur, disconnect unit from mains
supply and follow instructions as detailed in Section ‘Maintenance’.
Do not
cover the reaction Station or PSU whilst in use.
It is recommended
never
to leave any heating apparatus
unattended during operation.
Only use Original Equipment manufacture’s spares and
accessories. Ref Section 10.
Neither the Reaction Station or Clarity System are spark, flame or
explosion proof and no part of the equipment has not been
designed for use in hazardous areas in terms of BSEN 60079-
14:1997. Keep flammable, low flash point substances away from
the apparatus.
Do not
operate or handle any part of this product with wet hands.
Do not
touch the heating surface whilst in use.
Do not
lean or stretch over equipment.
Keep all Mains Plugs and Lead set and cable away from the
heating surface.
When heating certain substances, the liberation of hazardous gases
may require the use of a fume cupboard or other extraction system.
Do not charge any vessel while in use unless using a dosage pump.
Summary of Contents for Electrothermal ATS10232E
Page 12: ...Page 12 of 19 M7998 Issue 2 3...
