Translation of the original operating manual
Drive unit for flexible shafts
– MB 50
OI NO.: 001 580 674
- 10 - of -16-
Version 16.01.2020
GB
The machine should be installed as near as possible to the workplace. Avoid awkward body positions.
When setting up, make sure that the machine is standing securely and that the ventilation on the housing can be
easily accessed.
The rubber buffers on the stand feet ensure secure standing on a smooth surface.
You can get either a moveable frame or a bench stand for the MB 50.
6.2.1
Mounting the Machine on the Bench Stand or Portable Stand
Figure 4: Mounting on bench stand or portable stand
Place the machine on a stand between the bracket (B).
Mount and fix the stand to the machine with two clamping levers (A) through the holes in the holder (C).
6.2.2
Suspension of the Drive Unit
DANGER
– Falling down!
Use a lockable snap hook to prevent the machine from accidentally falling down.
In order to operate the machine suspended, it must be suspended from the hole as shown in Figure 5 with a
suitable load suspension device. A suitable snap hook in accordance with EN 362 must be used to prevent
accidental falling down. The fastener must be selected so as to prevent damage to the machine and to the
fasteners.
Figure 5: Suspension of the machine
