13
VEGA
1
O
Fig. 6.11
Fig. 6.12
Fig. 6.13
when loading is complete, push the drawer inside the machine
ensuring that it arrives perfectly at the end of the track so as
to guarantee perfect electrical connection.
every spiral can be rotated 45° at a time (fig.6.11) so as to
find the ideal position for every kind of product. For adjustment,
see the special chapter.
N.B.:
insert the products between the coils without exerting any
type of force; the products must not be blocked between the
coils in any way. There are spirals with different pitches; find the
appropriate spiral for the type of product to be sold.
6.4.2 Plate insertion
The plates indicating the number of each selection and the
relative price are inserted in the special slits as indicated in the
figure 6.11. For the number to be given to each selection,
check Chapter 9.2.3 (Change spiral number).
6.4.3 Payment system installation
The distributor does not have a payment system; the person
installing the payment system has the responsibility for any
damage to the machine itself and/or to things and/or persons
due to incorrect installation.
Unscrew the two knobs
(Fig.6.12-pos.1)
withdraw the support bracket from the machine
(Fig.6.12)
couple the automatic coin dispenser to the support bracket
(Fig.6.13)
clamp the bracket using the two knobs
(Fig.6.12-pos.1)
connect the automatic coin dispenser to the Master board.
The selectors must be connected directly onto the Master board,
the executive serial systems through the interface cable supplied.
Next proceed to programming for correct calibration. Consult
Chapter 7.0 (PROGRAMMING) to check parameter setting,
consistent with the system used.
