ELD-1 Setup and Installation
Setup and Use
The Vocia software provides an intuitive interface for configuration of the ELD-1. The information supplied
by this manual relates to physical connections and assignment. For more details on software setup,
please consult the Vocia Help File.
Installation
The ELD-1 may be mounted in a rack or on a wall using four screws at the end of the flanges or two
screws in the keyholes on the rear.
An ELD-1 should be connected at the end of every speaker line that is to be monitored. The diagram
below shows the appropriate connection to the speaker wire and the network. In EN54-16 compliant
systems the ELD-1 must be connected to a compliant Ethernet switch that is backed by an uninterruptible
power supply (UPS).
Install the unit away from heat sources, such as vents and radiators, and in rooms with adequate
ventilation. Ensure that air can circulate freely behind, beside, and above the unit. Do not exceed the
maximum ambient operating temperature of 32° - 108° F (0° - 42°C). Be aware of conditions in an
enclosed rack that may cause the temperature to exceed ambient room conditions.
Vocia Amplifier with ELD-1 Wiring Topology
VO-4e Emergency Output device with ELD-1 Wiring Topology
