RP-L1 & RP-L2
Remote Panels (Level)
RP-L1:
The RP-L1 is a remote control panel, which consists of a single 25k
Ω
linear taper potentiometer mounted on a grey ‘decorator’ style cover plate, with
a single-gang ‘cut-in’ style PVC electrical back-box and a pre-wired pigtail. The
RP-L1 may be used to provide remote control of volume levels as specified for
the following BIAMP products:
products functions
801
Mic/Line Mixer . . . . . . . . . . Main Output (level)
601
Mic/Line Mixer . . . . . . . . . . Main Output (level)
301
Mic/Line Mixer . . . . . . . . . . Main Output (level)
CMA Series
Mixer/Amplifiers . . . . . Main Output (level)
IWA250
In-Wall Mixer/Amplifier . . . . Inputs/Outputs (level)
Voltage Control Box
. . . . . . . . . Various Products
Audia (programmable)
Nexia (programmable)
The RP-L1 includes a pre-wired pigtail for ease of installation. This pigtail
consists of three 22-gauge wires, which are color-coded for wiring as follows:
Red . . . . Wiper
. . . . . . Control Terminal (C)
White . . . . High (CW) . . . Control Voltage (+10V)
Green . . . Low (CCW) . . . Ground (GND)
See product manuals for remote control applications and wiring specifics.
Soldered connections with heat-shrink, or properly sized crimp connectors, are
recommended. See last page for back-box installation & block diagrams.
RP-L1
RP-L2:
The RP-L2 is a remote control panel, which consists of two 25k
Ω
linear taper potentiometers mounted on a grey ‘decorator’ style cover plate,
with a single-gang ‘cut-in’ style PVC electrical back-box and two pre-wired
pigtails. The RP-L2 may be used to provide remote control of volume levels as
specified for the following BIAMP products:
products functions
801
Mic/Line Mixer . . . . . . . . . . Main Output (level)
601
Mic/Line Mixer . . . . . . . . . . Main Output (level)
301
Mic/Line Mixer . . . . . . . . . . Main Output (level)
CMA Series
Mixer/Amplifiers . . . . . Main Output (level)
IWA250
In-Wall Mixer/Amplifier . . . . Inputs/Outputs (level)
Voltage Control Box
. . . . . . . . . Various Products
Audia (programmable)
Nexia (programmable)
The RP-L2 includes two pre-wired pigtails for ease of installation. Each pigtail
consists of three 22-gauge wires, which are color-coded for wiring as follows:
Red . . . . Wiper
. . . . . . Control Terminal (C)
White . . . . High (CW) . . . Control Voltage (+10V)
Green . . . Low (CCW) . . . Ground (GND)
See product manuals for remote control applications and wiring specifics.
Soldered connections with heat-shrink, or properly sized crimp connectors, are
recommended. See last page for back-box installation & block diagrams.
RP-L2
Summary of Contents for RP-S4
Page 5: ......
