background image

14 

WARRANTY 

 
 

BIAMP SYSTEMS IS PLEASED TO EXTEND THE FOLLOWING 5-YEAR LIMITED WARRANTY TO THE 

ORIGINAL PURCHASER OF THE PROFESSIONAL SOUND EQUIPMENT DESCRIBED IN THIS MANUAL 

 
 

1.  BIAMP Systems warrants to the original purchaser of new 
products that the product will be free from defects in material 
and workmanship for a period of 5 YEARS from the date of 
purchase from an authorized BIAMP Systems dealer, subject to 
the terms and conditions set forth below. 
 
2.  If you notify BIAMP during the warranty period that a BIAMP 
Systems product fails to comply with the warranty, BIAMP 
Systems will repair or replace, at BIAMP Systems' option, the 
nonconforming product.  As a condition to receiving the benefits 
of this warranty, you must provide BIAMP Systems with 
documentation that establishes that you were the original 
purchaser of the products.  Such evidence may consist of your 
sales receipt from an authorized BIAMP Systems dealer. 
Transportation and insurance charges to and from the BIAMP 
Systems factory for warranty service shall be your responsibility. 
 
3.  This warranty will be VOID if the serial number has been 
removed or defaced; or if the product has been altered, 
subjected to damage, abuse or rental usage, repaired by any 
person not authorized by BIAMP Systems to make repairs; or 
installed in any manner that does not comply with BIAMP 
Systems' recommendations. 
 
4.  Electro-mechanical fans, electrolytic capacitors, and normal 
wear and tear of items such as paint, knobs, handles, and 
covers are not covered under this warranty. 

5.  THIS WARRANTY IS IN LIEU OF ALL OTHER 
WARRANTIES, EXPRESS OR IMPLIED.  BIAMP SYSTEMS 
DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR 
IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR PURPOSE.   
 
6.  The remedies set forth herein shall be the purchaser's sole 
and exclusive remedies with respect to any defective product.  
 
7.  No agent, employee, distributor or dealer of Biamp Systems 
is authorized to modify this warranty or to make additional 
warranties on behalf of Biamp Systems.  statements, 
representations or warranties made by any dealer do not 
constitute warranties by Biamp Systems.  Biamp Systems shall 
not be responsible or liable for any statement, representation or 
warranty made by any dealer or other person. 
 
8.  No action for breach of this warranty may be commenced 
more than one year after the expiration of this warranty. 
 
9.  BIAMP SYSTEMS SHALL NOT BE LIABLE FOR SPECIAL, 
INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, 
INCLUDING LOST PROFITS OR LOSS OF USE ARISING OUT 
OF THE PURCHASE, SALE, OR USE OF THE PRODUCTS, 
EVEN IF BIAMP SYSTEMS WAS ADVISED OF THE 
POSSIBILITY OF SUCH DAMAGES. 

 
 
 
 
 

Biamp Systems 

10074 S.W. Arctic Drive 

Beaverton, Oregon 97005 

(503) 641-7287 

 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 

585.0185.00 

Summary of Contents for Audia EXPI





















Reviews: