BHM Medical Voyager V5 Duo, Technical Manual

Page: 37 / 56

37
Maintenance and Service
Horizontal Motor Replacement
Fig. 32
Accessing the motor:
1
Turn unit off and follow the steps explained in Fig. 7, and
Fig. 8.
2
Remove the screws that secure the top plastic housing.
3
Unplug the membrane for the alternative up/down switches located on the unit, as
well as the SWL key membrane, if applicable (see Fig. 36 step 3 for location).
4
Unplug the main circuit connector.
5
With an extractor tool, disconnect the two horizontal motor wires from the main circuit
harness (both are blue) and replace them with the ones from the new motor.
1) Red/white - From switch
2) Not used
3) Blue - Lateral motor
4) Blue - High limit switch
5) Not used
6) Red - Lateral motor
7) Not used
8) Blue - High limit switch
9) Black/white - Battery
10) Orange - From switch
11) Red - Vertical motor
12) Blue - Vertical motor
Main Circuit Harness Wiring