Preventive Maintenance Schedule
19
Cleaning of Casters
1.
Place the lift on its side.
2.
Remove the bolt and locknut that secure
the existing front caster assembly to the
fork.
3.
Remove all debris and clean any dust.
CAUTION: For the front caster, examine
and replace the existing washer if worn.
The front caster assembly consists of two
(2) washers and a caster in between.
The caster will fall out between the two
washers.
3.
Position the front caster in the assembly
and tighten up the bolt and locknut.
4.
Line up the mounting holes in the new
front caster assembly and the fork
5.
Install the bolt through the fork and
caster assembly and thighten securely
with the locknut.
Annual Inspection
The Ergolift 2 and the accessories must be
inspected annually by a qualified technician.
WARNING: Ergolift 2 and accessories
must be serviced every 12 months as a
minimum requirement.
Do not attempt to do the inspection
unless you are qualified to do so.
As part of the annual inspection, an
annual load test with the safe working
load must be performed on the Ergolift 2,
as required for CE MARK MAINTENANCE.
After annual inspection, have the log book
signed by qualified personnel.
Preventive Maintenance Schedule
