BH emotion easy go, User Manual

Page: 9 / 18

0-5%
CAPACITY
blinking
only MODE 0%
lights
7. Adjustments
The user can access the adjustments menu by pressing buttons (+) and (-) for 3 seconds. Press the POWER button to
scroll through the adjustments options:
The system will exit the “Adjustments” menu when the user presses the POWER button for 3 seconds.
1º 2º 3º
4º
Enter 1 1
Wheel size
2 2
Km Miles
Km / Miles
Exit
3 sec
3 sec
3 3
AWD Mode
AWD motor
4 4
Battery type
Battery
(+) Ah (-) Ah
Selection of wheel dimension
At any time, the user can change the dimension of the wheel. To do that, the perimeter dimension of the wheel is
viewed in millimeters and its equivalence in inches (16, 20, 24, 26, 27’5, 28 or 29). These dimensions can be modified using
the (+) and (-) buttons. The perimeter measuring of the wheel is done as follows:
D (mm)
Change between metric system (km) and imperial (miles), pressing (+) or (-).
Exclusive functions AWD models.
The AWD models have 2 motors, one in the front hub and one in the rear hub. Pressing the (+) and (-) buttons allows
choosing the monitoring mode, form among the following:
-
ALL. The two motors work in parallel with the activated traction control.
-
ECO. The two motors are coordinated and complemented to obtain energy efficiency.
-
FRONT. Only the front motor works.
-
REAR. Only the rear motor works.
-
OFF. Select this option in the e-bikes that are not AWD.
Select battery capacity (12 Ah) for correct range calculation.
The AWD models are not homologated under the regulation EN 15194 and therefore are
designed for exclusive off-road use.
OFF REAR
ALL ECO FRONT
80 - 10%
CAPACITY 60 - 80%
CAPACITY 40 - 60%
CAPACITY 20 - 40%
CAPACITY 10 - 20%
CAPACITY 5-10%
CAPACITY
NO
MODE 100% only
MODE 30%
Perimeter of the wheel (mm) = Diameter of the wheel (D in mm) x 3,14
9