background image

 

 

 

TECHNICAL SPECIFICATIONS

 

 

Motor 

BH EMOTION with Continuous Current brushless

 

Power 

250W (500W in the Nitro 

models)  

System voltage 

36 V (48 V in the Nitro models) 

Battery 

BH EMOTION Ion-Litio

 

Maximum assistance speed 

25 km/h (45 km/h in the Neo Nitro model)

 

 
 
 

 

QUESTIONS AND ANSWERS

 

 

What is this bicycle’s the maximum speed?

 

Depends on the user. There isn’t a maximum limit. However, in speeds over 25 km/h, the pedal 

assistance is deactivated. This assistance limitation is a legal requirement for pedal assisted 

bicycles, according to the EN 15194 European Regulation. The Nitro models are an exception and 

they are homologated as motorcycles. The maximum assistance speed is limited to 45 km/h.

 

 

Isn’t the BH EMOTION bicycle too heavy?

 

No, considering that the weight of BH EMOTION bicycles is between  16.75 kg and 24.40 kg, 

depending on different models, they are the lightest electrical bicycles in the market. The pedal 

assistance provides the BH EMOTION an additional weight of 5-6 kg when comparing a standard 

bicycle with the same characteristics, which is the sum of the battery and the motor.

 

 

Should I take any additional precautions when riding a BH EMOTION instead of a standard bicycle?

 

No,  but  we recommended paying  special  attention  when starting the  BH EMOTION  due  to  the 

additional drive provided by the motor. In this sense, we recommend starting in Eco mode and 

using a short development (large cogs).

 

 

Should I stop every time I want to activate the pedal assistance?

 

No,  the  pedal  assistance  may  be  activated  while  riding  the  bicycle,  although  we  do  not 

recommend it due to the distraction it may produce. The only condition established for a correct 

activation of the assistance is to stop pedaling for two seconds after pressing the POWER button, 

thus allowing a correct activation of all the electrical system elements.

 

 

May I remain standing, stopped or on the bicycle when at traffic lights?

 

Yes. The motor will stay inactive providing that you don’t apply pressure on the pedal. The greater 

force applied on the pedal, a greater forward drive shall be result from the bicycle. This is a result of 

the continuous reading that the magnetic torque sensor carries out on the force applied on the 

pedal.

 

 

How frequently should I take my bicycle to a BH store for maintenance?

 

None of the electrical components of the BH EMOTION pedal assistance system needs a periodic 

maintenance. The rest of components require a similar service than the components of a standard 

bicycle, which depends on the frequency of the bicycle’s use and its care.

 

16 

Summary of Contents for emotion easy go



















Reviews: