M400
23
1. Designed with legrest length adjustment to provide a comfortable leg postion, along with
various massage functions, consequently achieving the most effective of massages.
2. The angle of the backrest and legrest can be adjusted to the user’s needs, to achieve the
most effective of massages.
3. The air pressure massage has been designed specifically for use on the feet and calves.
4. The ergonomic design is the result of exhaustive research to achieve the best massage
possible.
TROUBLE SHOOTING
This massage chair is controlled by a microcomputer, susceptible to fluctuations of ±10-15% in
the electricity supply. In such cases the massage chair may produce the following problems:
Problem
Check the following
Solution
Rasping sound
during use
This is due to the construction of the chair or
friction between the massage rollers and the
leather upholstery,
Normal sound
The remote control unit works but not the
chair.
The chair may have overheated
due to prolonged use. Switch it off
and let it cool down for 30-50
minutes.
Neither the remote control unit or the chair
work.
(1) In automatic mode with the
appropriate program.
Wait a few seconds and press the
ON switch again.
(2) Switch the chair OFF and ON
again to restart it.
Is it plugged into the electrical wall socket
Plug it in.
It is switched off
Switch it on
It does not operate
The fuse has blown
Replace the fuse with a similar
type
It is not possible to
raise or lower the
backrest or footrest
Is the backrest or footrest overloaded
Reduce the load or pressure on
the backrest or footrest.
It is not possible to
extend the footrest
normally.
The footrest is too close to the floor, which is
activating the floor proximity sensor.
Place the footrest in a higher
position.
If the above solutions do not solve the problem, switch the chair off and unplug it from the wall
socket, then get in touch with your Technical Assistance Service or local retailer, who will
remedy the fault.