YV 30 VIBRO-BOOST
BH Fitness • 20155 Ellipse • Foothill Ranch • CA • 92610
www.bhnorthamerica.com • Phone 949-206-0330 • Fax 949-206-0350
7
Continued Assembly Steps
Step 1
Put the Base on the Floor mat, and then put the left
and right handle bar belt on the base according to
the figure #1.
Fig. #1
Step 2
Take out the column from the carton; connect the electrical wire and control wire with base
separately (as small figure #2 shows). Put the wire into the column. Then install the column on the
plate, pay attention that the column not press the wires.
Attach the column to the plate with the four M10 Flat washers,
four M10 spring washers and four M10X50 Allen bolts. The
transportation wheel bracket is assembled to the front holes.
Then tighten all the bolts.
Fig. #2
Fig. #3
