BH FITNESS S3IC, Owner'S Manual

Page: 17 / 24

17
STEP 9
SAFETY INSPECTION
Before finishing installation, please inspect all the screws and nuts carefully to make
sure all of them tightened.
STEP 8
INSTALL THE WATER BOTTLE HOLDER
There are 2 Screws (72) and 2 Washers (70) mounted in the right fork of the bike, take
them out. Align the Water Bottle Holder (65) with the holes on the right fork and
secure with 2 Washers (70) and 2 Screws (72).
NOTICE
1. Inspect all the Nuts, Nut Caps and Pedals
and re-tighten as needed regularly and
inspect the equipment periodically. Should
you find any defective parts, replace them
immediately. Don’t exercise until they are
repaired.
2. Pay more attention to normal wear on
parts. As in the following figure, please
inspect the Brake Pad (24) to make sure
that it is in good working condition before
exercise. If it is not, please replace it.