manualshive.com logo in svg

BH FITNESS LK790, Owner'S Manual, Page: 5 / 40

Share
Download
BH FITNESS LK790 Owner'S Manual Download Page 5

 5 

SAFETY INFORMATION

PRECAUTIONS

This treadmill has been designed and constructed to provide maximum safety. 

Nevertheless, certain precautions should be taken when using exercise equipment. 

Read the entire manual before assembling and using the treadmill. Please observe the 

following safety guidelines:

1.  Keep children and pets away from this equipment at all times. DO NOT leave them unsupervised 

in the room where the treadmill is kept.

2.  If you experience dizziness, nausea, chest pains or any other symptom while using this treadmill 

STOP the exercise. SEEK IMMEDIATE MEDICAL ATTENTION!

3.  Use the treadmill on a level and solid surface. Adjust the feet for stability.

4.  Keep your hands away from any of the openings and moving parts.

5.  Wear clothing suitable for doing exercise. Do not wear baggy clothing that might get caught in the 

treadmill. Always wear athletic shoes when using the treadmill and tie the laces securely.

6.  This treadmill must only be used for the purposes described in this manual. DO NOT use 

accessories that are not recommended by BH Fitness.

7.  Do not place sharp objects near the treadmill.

8.  Any person with physical or coordination limitations should not use the treadmill without the 

assistance of a qualified person or doctor.

9.  Do warm-up stretching exercises before using the equipment.

10. Do not use the treadmill if it is not working correctly.

11. Before using the treadmill, thoroughly inspect the equipment for proper assembly.

12. Keep clear a perimeter of 3 feet (1 meter) around the treadmill before operating.

13. Use only authorized and trained technicians if a repair is needed.

14. Please follow the advice for correct training, as detailed in the Training Guidelines.

15. Use only the tools provided to assemble this treadmill.

16. This treadmill was designed for a maximum user weight of 438 Lbs (199 kgs)

17. The treadmill can only be used by one person at a time.

18. Do not use this treadmill outdoors.

19. Do not use the treadmill if the main electrical cord becomes damaged or frayed. Keep the main  

electrical cord away from any hot surfaces.

 

Caution:

 Consult your doctor before beginning to use the treadmill or any exercise 

program. Read all of the instructions before using any exercise equipment.

KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

Summary of Contents for LK790









































Reviews:

No comments