14
LEVELLING
Once the unit has been placed into its
final position, make sure that it sits flat
on the floor and that it is level. This is
achieved by screwing the adjustable
foot (U) up or down, figure 9.
MOVEMENT & STORAGE
.
The unit is equipped with wheels (V)
to make it easier to move about. The
two wheels at the front of the unit
make it easier to place the unit in any
chosen position, as shown in the
figure 10. Store it in a dry place,
preferably not subject to changes in
temperature.
MAINS CONNECTION
Insert the jack (m) on the transformer
(106) into the connection hole (k) on
the main body (40) (bottom, rear of the
machine)
and
then
plug
the
transformer into a 220 V mains supply,
Figure 11.
Do not hesitate to get touch with the
Technical Assistance Service if you
have any queries by phoning customer
services (see last page in manual)
BH RESERVES THE RIGHT TO
MODIFY THE SPECIFICATIONS OF
ITS PRODUCTS WITHOUT PRIOR
NOTICE
Summary of Contents for H8705R
