BGU FSW 4.5 M, Original Instruction Manual

Page: 12 / 24

Seite 12
5.6.3 Brake
1 engaged
0 disengaged
CAUTION: tripping of the brake lever occurs when the clutch lever is engaged with the brake
lever still in its left-hand position.
The brake is engaged by means of a nut (3) and a nut (4). When the brake is engaged the lever (1) shifts
into its position EIN (Fig. 7).
First adjust the nut (3) using an open-end spanner until the nut stands approx 5 mm away from the lever.
Then adjust nut (4) till the sliding plate underneath the nut projects 3-4 mm out out of the winch frame. If
you cannot reach the required brake force, repeat the same steps tightening the nut by further turning it to
the right side.
Excessive brake force will cause troublesome unwinding procedures. In this case release the nut by
slightly turning it to the left.
0
1
(Fig. 7)
(Fig. 8)