BGU FSW 3.5 M, Original User Manual

Page: 27 / 32

27
Pos. Description Number
of pieces
Pos. Description Number
of pieces
1 Shaft w. chain sprocket 1 30 Washer Ø 8,5 DIN 125 A 4
2 Shaft guard 1 31 Screws M12x40 to DIN 933 2
3 Grooved ball bearing 6306 2RS 1 32 Washer Ø 13 to DIN 125 A 2
4 Grooved ball bearing 6306 2RS 1 33 Safety shield 1
5 Nut M12 to DIN 985 1 34 Safety shield (small) 1
6 Spacer sleeve 1 35 Screws M10x30 to DIN 933 4
7 Protection plate for sprocket
wheel
1 36 Nut M10 to DIN 934 4
8 Shaft protector 1 37 Screws M8x16 to DIN 933 2
9 Pulley casing 1 38 Bolt with chain 1
10 Pulley 1 39 Bolt with chain 2
11 Wire rope guide 1 40 Linch pins 2
12 Bolt 1 41 Linch pins 1
13 Grooved ball bearing 6306 2RS 1 42 Roller chain 3/4“ 12B-1, 71 links 1
14 Spacer sleeve 1 43 Connecting piece 3/4“ 12B-1 1
15 Washer 1 44 Plate 2
16 Shaft protector 1 45 Bolt Ø16x48 1
17 Rod 1 46 Seeger Ring, outer diam. 30 1
18 Plate 1 50 Linch pins 1
19 Pull rod 1 51 Connector 1
20 Ball Ø 8,7 2 52 Bolr 1
21 Tensioning spring 1 53 Screws M16x100 to DIN 931 1
22 Spring pin 6x32 1 54 Locking groove M 16 to DIN 985 1
23 Screws M8x16 2
24 Screws M20x60 to DIN 931 1
25 Screw M8x60 to DIN 931 2
26 Nut M20 to DIN 985 1
27 Nut M8 to DIN 985 5
28 Washer Ø 13 to DIN 125 A 2
29 Spacer sleeve 1
13.2 Part 2