BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 8857
Engine Timing Tool Set for Opel 1.2 / 1.4
TOOLS
No.
Description
to be used as OEM
1
Camshaft Sensor Disc Tool
EN-49977-100
2
Camshaft Adjuster Tool
EN-49977-200
3
Camshaft Sensor Locking Tool
EN-49978
4
Chain Tensioner Locking Tool
KM-955-1
5
Camshaft Locking Tool
KM-953-A
6
Crankshaft Locking Tool
KM-952
7
Belt Tensioner Locking Pin
KM-955-2
INTENDED USE
This tool set is made adjusting the engine timing on 1.2 and 1.4 L Opel engines with two overhead
camshafts (see vehicle list). The set includes important tools for locking camshaft and crankshaft and
allows a replacement of timing chain and there components.
SAFETY ADVICE
•
DO NOT use the set if any parts are missing or damaged.
•
Never lay tools on the vehicle's battery. This may short the terminals together.
•
Be careful when working on running engines. Loose clothes, tools and other things can be
caught up in revolving parts which may lead to serious injuries.
•
Keep children and other unauthorised persons away from the working area.
•
Be careful when working on hot engines – risk of burn!
•
Remove the negative battery connection before repairing, so you avoid short circuits and that the
engine will not start unintentionally.
•
This manual is just brief information and will not replace a garage handbook.
•
Always consult specific service literature for information about torques, assemblies and
disassemblies etc.
•
After any successful maintenance and before starting the engine, you should rotate the engine
for two turns manually to check the new control time.
•
Turn the crankshaft in the normal direction (clockwise unless stated otherwise) and only at the
crankshaft itself, never turn the crankshaft by turning camshaft or another wheel.
