BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
USE
1. Determine the position of the sensor and use
the HSS Twist Drill (6) to make a hole in the
appropriate location.
2. Use the size of the sensor retaining ring to
choose the appropriate punching tool (24
mm in this example).
3. Place the tool on the bumper as shown in the
picture.
4. The punch (c) is pulled into the die (b) and
cutting the required hole in the bumper by
turning the spindle nut.
