BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 9739
Punching Tool Set for Parking Sensors
TOOLS
1. Punching tool Ø 17 mm / 19 mm
2. Punching tool Ø 18 mm / 20 mm
3. Punching tool Ø 18.2 mm / 22.5 mm
4. Punching tool Ø 26.7 mm / 24 mm
5. Punching tool Ø 26 mm / 32 mm
6. HSS Drill Ø 10,2 mm
7. Punching tool spindle with nut
INTENDED USE
This tool kit is used to create holes in plastic bumpers for parking sensor (PDC).
SAFETY ADVICE
Use the tool for its intended purpose only.
Check the tool before use and do not use the tool if parts are missing or damaged.
Keep children and other unauthorized persons away from the work area.
Never allow children to play with the tool or its packaging.
Do not work on any parts near which live cables are located.
Only punch until the material has been punched through.
Pay attention to the protection of your hands while using the punching tool! Do not put your hands
between the punching tool during punching.
Always wear protective goggles when drilling and, if necessary, a hairnet.
PUNCHING TOOL PARTS
Punching tools of the four hole sizes consist of head plate (a), die (b) and punch (c).
1
2
3
4
5
6
7
Spindle nut
(7)
Spindle
(7)
Cutting
plastic part
Head plate
(a)
Die
(b)
Punch
(c)
a b c
a
b
c
a
b
c
a
b
c
a
b
c
