SW-Stahl und Werkzeugvertriebs GmbH
Tel. +49 (0) 2191 / 46438-0
F
5
6
e
s
s
a
r
t
S
r
e
s
u
k
r
e
v
e
L
ax +49 (0) 2191 / 46438-40
e
d
.l
h
a
t
s
w
s
@
o
f
n
i
:l
i
a
M
-
E
d
i
e
h
c
s
m
e
R
7
9
8
2
4
-
D
Instruction Manual
BGS technic KG
Bandwirkerstr. 3
42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Art. 8846
Rear
Trailing Arm Bush Tool
for Ford Fiesta IV and Ka
CONTENTS
1 Screw Rod
2 Retention Nut
3 Pushing Cup
4 Receiving Cup
5 Insertion Cup
6 Force Nut
GENERAL INFORMATIONS
This Set is designed for removing / installing the rear axle mounting bushes on Ford Fiesta IV and Ka
(1996 onwards) and can be used directly on vehicle, without removing the rear trailing link.
SAFETY INFORMATIONS
Read these instructions carefully. Note the safe operational requirements, warnings and cautions.
Use the tool correctly and with care for the purpose for which it is intended. Failure to do so may
cause damage and personal injury and will invalidate the warranty. Please keep instructions safe for
future use.
•
Do not use the tool if it damaged.
•
Only use the tools for purposes for which it is designed.
•
Do not use the tools when you are tired or under the influence of alcohol, drugs or intoxicating
medicines.
•
Maintain tools in good and clean condition for best and safest performance.
•
Ensure that a vehicle which has been jacked up is adequately supported with axle stands and
that the wheels are chocked, refer to the vehicle manufacturer’s service instructions, or a
proprietary manual.
•
Ensure that work area has adequate lighting.
•
Keep children and unauthorised persons away from the work area.
•
Wear approved eye protection and suitable clothing to avoid snagging.
•
Do not wear jewellery and tie back long hair.
•
Do not use air tools to operate the force screw.
•
When not in use, store puller in a safe, dry childproof area.
•
The force screw must be kept well lubricated.
•
This manual is provided as a guide only, refer to the vehicle manufacturer’s service instructions,
or a proprietary manual, to establish the current procedure and data.
Failure to comply with these instructions may result in damage to the puller or vehicle and/or personal
injury.
The warnings, cautions and instructions referred to in this manual cannot cover all possible conditions
and situations that may occur. It must be understood that common sense and caution are factors
which cannot be built into this product, but must be applied by the operator.
