BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
USE (COUNTER HOLDER)
Install the upper part of the counter holding tool (
3
)
to the lower part (
1
), using the three supplied
screws (
4
).
Insert the counter holding / pulling claws (
Z
) of the
lower part (
1
) through the slots (
A
) in the belt pulley
and positioning it behind of the crankshaft pulley
arm (
B
).
USE (PULLER)
Install the upper part of the pulling tool (
2)
to the
lower part (
1
), using the three supplied screws (
4
).
Insert the counter holding / pulling claws (
Z
) on the
lower part (
1
) through the slots (
A
) in the belt pulley
and positioning it behind of the pulley arms (
B
).
RIEMENSCHEIBE
A
Pulley slot
B
Pulley arm
ENVIRONMENTAL PROTECTION
Dispose of this product in an environmentally friendly manner at the end of its life. Recycle
undesired materials instead of disposing of them as waste. All tools, accessories and
packaging should be sorted, taken to a recycling centre and disposed of in an
environmentally friendly manner. Check with your local waste disposal authority about
recycling measures.
