BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 8231
Supporting Joint Tool Set | VW T4
ATTENTION
Read the operating instructions and the included safety information carefully before using the product.
Use the product correctly, with caution and only for the intended purpose.
Failure to observe the safety instructions can lead to damage, injury and voiding of the warranty.
Keep these instructions in a safe and dry place for future reference.
Include the operating instructions if you pass the product on to third parties.
INTENDED USE
This tool set is used for assembly and disassembly of the front axle upper suspension joints (guide
joints) on VW T4 Bus, Multivan, California, etc.
SAFETY INFORMATIONS
•
Keep children and unauthorized persons away from the work area.
•
Do not let children play with this product or its packaging.
•
Make sure that the work area is adequately illuminated.
•
Keep the work area clean, tidy, dry and free of other materials.
•
Do not let untrained people work with this tool set.
•
Always work according to the vehicle manufacturer's instructions. This manual serves only to
illustrate the product and in no way replaces vehicle-specific service literature.
•
Always wear approved eye protection and work gloves.
•
Ensure a secure and well-gripped stance during fitting.
•
Check the condition of the tool regularly and do not use it, if it is damaged.
•
Make sure the tool is properly mounted.
•
Do not over tighten the spindle or apply excessive force, as this may damage both the tool and
the component.
•
The tool is not suitable for impact wrenches. The use of an impact wrench can rupture tool
parts and flying tool fragments can cause injury.
•
Always grease the spindle threads before using the tool.
TOOLS
1
Extractor
2
Spindle, 24 mm
3
Thrust piece
4
Thrust piece
5
Thrust piece
6
Reducing fork
7
Reducing fork
