BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 7753
Splitting Knife Set for Ball Bearing Assemblies
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
This mechanical puller is made for removing bearings, gears and bushes from shafts and it is suitable
for engineering, automotive, marine and agricultural applications. The product consists of a
chromium-vanadium alloy and meets the highest quality standards.
SAFETY INFORMATIONS
•
Read carefully the instructions before working with this tool set.
•
Do not use this tool set for other purpose for which it is designed.
•
Regularly check the condition of the tool and replace the damaged parts.
•
Lifting of vehicles only allowed on the special lifting points.
•
Before starting work under a car always ensure that it is adequately supported by axle stands or
ramps. Chock wheels and ensure that the hand brake is firmly applied.
•
Ensure a secure and well-gripped stance during fitting
.
•
Always use approved eye protection, especially when working under vehicles.
•
Ensure that tools are correctly mounted.
•
Do not over tighten or use undue force as this can cause damage to both tool and component.
•
The tool is not suitable for air impact wrenches. The use of an air impact wrench may lead to the
spindle bearing or other components bursting and fragments of components flying around may
lead to injuries.
•
Always use workshop manual for detailed instructions.
•
Always lubricate the screw threads before using the tool.
•
Check & replace any damaged components as required.
•
Keep children and unauthorized persons out of the working area.
•
Keep this tool out of children reach.
COMPONENTS
1
Separating shells, 13 - 70 mm
2
Shell connecting bolts with nuts
3
Bracket bolts
4
Bracket bolt extensions
5
Puller bracket
6
Spindel, 290 mm
7
Washer
8
Nuts
9
Thread adapter
10
Pressure piece
