BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
USE
1.
Remove the brake caliper and any brake disk
securing screw.
2.
Insert one wheel nut / wheel bolt, this prevents a
falling down of the brake disc when it suddenly
released.
3.
Install the puller as shown in the figure and remove
the brake disc from the wheel hub by turning the
spindle clockwise.
4.
Remove the wheel nut / wheel bolt and brake disc.
