BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
SCOPE OF DELIVERY
•
Step plate Size 1, Ø 86 x 77 x 68.5 mm
(Employment with bell Size 1 +2)
•
Step plate Size 2, Ø 102 x 92 x 81.0 mm
(Employment with bell Size 3+4)
•
Bell Size 1 Ø 75.9
•
Bell Size 2 Ø 86.0
•
Bell Size 3 Ø 91.0
•
Bell Size 4 Ø 102.0 I with bevel
•
Spindle 7/8", L = 300 mm
(incl. Thrust bearing
•
Forcing nut SW 32, 60 mm length
•
Pressure sleeve 0 38, 40 mm length
•
Thrust washer 0 40 x 22 x 3 mm
•
Dismantling bolt M12 x 1.5 (3x)
•
Dismantling bolt M14 x 1.5 (3x)
•
Pressure plate Size 1, Ø 88.40 mm
•
Pressure plate Size 2, Ø 83.30 mm
•
Pressure plate Size 3, Ø 81.50 mm
•
Pressure plate Size 4, Ø 77.50 mm
•
Pressure plate Size 5, Ø 75.75 mm
•
Pressure plate Size 6, Ø 73.30 mm
•
Pressure plate Size 7, Ø 73.05 mm
depth 18.3 mm I inside stepping
•
Pressure plate Size 8, Ø 71.50 mm
•
Pressure plate Size 9, Ø 70.30 mm
•
Pressure plate Size 10, Ø 66.60 mm
•
Pressure plate Size 11, Ø 63.20 mm
•
Pressure plate Size 12, Ø 59.00 mm
•
Pressure plate Size 13, Ø 55.00 mm
•
Adapter plate Ø 50.00 mm
Before use, check for completeness and possible damage incurred during transit.
DISMANTLING
1.
Select dismantling bolts according to wheel bolt screw thread M12x1.5 or M14x1.5 and screw
dismantling bolts into the screw threads of the wheel hub. Caution: Two support possibilities on
the wheel bearing housing are not required. An alternating support at one location of the wheel
bearing housing can be implemented as described:
1.1. Turn dismantling bolts as far as support possibility.
1.2. Turn dismantling bolts one rotation further.
1.3. Unload bolts by turning back.
1.4. Rotate wheel hub by 180° until the second bolt contacts the supporting location.
1.5. Proceed with the other bolts exactly as described in Step 1.3 etc.
Caution: Always work uniformly so that any canting is prevented.
2.
Remove the retaining ring with suitable pliers.
