BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
OPERATING
1. Press the "ON" key to turn on the instrument, 2 seconds later, the display shows a zero value.
2. To select desired unit, press "ON" key: PSI-BAR-KPA-Kg/cm²
3. Place the instrument's nozzle onto the tire's valve (refer to fig.2)
4. Ensure that a good seal exists between the nozzle and the valve by pressing tightly, no hissing
sound of escaping air should be heard.
5. Wait until the reading keeps stable for about 2 seconds, this stable reading is the result you
want. Remove the nozzle, the measurement is finished.
6. You can go on to measure other tires.
7. lf you don't operate the instrument for about 60 seconds, it will power off automatically.
8. To turn off it ahead of time, press the "ON" key for about 3 seconds.
Note
In order to get a good seal, please put the tire's air nozzle downside.
It's best when the nozzle is around the 6 or 7 o'clock position so that you can firmly press the gauge
straight down.
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories
and packaging should be sorted, taken to a recycling centre and disposed of in a manner
which is compatible with the environment.
DISPOSAL
Do not dispose battery in household waste.
Batteries should be disposed of in a responsible manner, they must be disposed at
appropriate collection point.
Dispose of this product at the end of its working life in compliance with the EU Directive
on Waste Electrical and Electronic Equipment. Contact your local solid waste authority
for recycling information or give the product for disposal to BGS technic KG or to an
electrical appliances retailer.
Fig.2
Instrument
Tire Valve
