P a g e
|
13
Programming
Now that you have either entered a new client, or selected an existing client from the client list,
you are now ready to begin programming.
Note: SMS string= *20#
Step 1A: Check Reception
Go to MORE>INFO to reveal the screen shown.
Press the reception check button. On Android the app will
automatically send a SMS string (*20#) to the intercom.
On iphone, users will be taken to their SMS screen to
confirm before sending the string
.
The intercom should reply with a signal level between 1 & 31.
1-12
Poor
13-20
Medium
21-31
Good
For good performance, signal level should be at least 13 or
better if 4G reception is available.
TIP:
If signal is lower than recommended, then take IMMEDIATE
action. Change network if possible, or use an optional high gain
antenna. Check power cable is within recommended
specification. (Poor power cable can lower reception).
SMS message sent to intercom.
SMS reply to your phone.
Step1B: Set APN (for VOLTE / 4G voice calling)
This feature is needed in order to make 4G voice calls with At&T. Check the
APN of your provider and then enter it in the blue section below and send
as SMS to the intercom. (For At&T cards from the store, you can use
“nxtgenphone”. For Tracfone provided SIM, then set the APN to
“RESELLER”.
9999
#
97
APNinfo
#
Pass code
Function code
APN info for network
Step1C: Reboot the Intercom
The intercom will need to be rebooted in order to log on to the network with the new APN which you
have stored. If you send another reception check (*20#), you may find that if it was on 3G signal
strength before, that it is now on 4G signal.
Summary of Contents for CELLPRIM4GE
Page 35: ...P a g e 35...
