ENGLISH
TECHNICAL SPECIFICATIONS
ELECTRICAL DATA
Power supply
220-230V 50/60Hz
Max. power absorbed from mains
BOTTICELLI SMART BT A 850: 200W
BOTTICELLI SMART BT A 1250: 250W
Fuses
see figure L-S
Supply to accessories
24V~ (180mA max)
24Vsafe (180mA max)
Blinker connection
24V~ max 25W
Courtesy light
BFT model courtesy LED lamp 24V
2W
Operating temperature
-20°C / +60°C
MECHANICAL DATA
Pulling and pushing force
BOTTICELLI SMART BT A 850: 850N
BOTTICELLI SMART BT A 1250: 1250N
Leaf max.
BOTTICELLI SMART BT A 850 : 13m2
BOTTICELLI SMART BT A 250 : 16m2
Working stroke
TRACK L.=2900 working stroke=2300 mm
TRACK L.=3500 working stroke=2900 mm
Maximum speed
BOTTICELLI SMART BT
A 850
Belt track= 240
mm/s
Chain track= 210
mm/s
BOTTICELLI SMART BT
A 1250
Chain track= 190
mm/s
Manoeuvres in 24 hours@
MAX+60°C
BOTTICELLI SMART BT A 850: 50
BOTTICELLI SMART BT A 1250: 100
Manoeuvres in 1 hour@ MAX+50°C 10
Typical instal-
lation of sec-
tional doors
at 20°C
BOTTICELLI SMART BT A 850: mq 6,7
100 consecutive ma-
noeuvres
BOTTICELLI SMART BT A 1250: mq 15,7 50 consecutive ma-
noeuvres
Impact reaction
integrated torque limiter on control panel
Limit switch
Electronic with ENCODER
Lubrication
permanent grease
Degree of protection
IP20
Motor head weight
5 kg
Noise level
<70dB(A)
Dimensions
see fig.B
INCORPORATED RECEIVER DATA
Incorporated rolling-code
radio receiver
Frequency 433.92 MHz
Coding
rolling-code algorithm
No. combinations
4 billion
Max no. radio controls to be
memorised
63
ACTUATOR INSTALLATION Fig.A
Arrange for the connections of accessories and safety and control devices to reach
the motor unit, keeping the mains voltage connections clearly separate from the
extra low safety voltage connections (24V).
Proceed to connection following the indications given in the wiring diagram.
The cables for connecting the accessories must be protected by a raceway
Preliminary checks
• Check that the door is balanced.
• Check that the door slides smoothly along its entire travel.
•
If the door has not been newly installed, check the wear condition of all its
components.
• Repair or replace faulty or worn parts.
•
The automation reliability and safety are directly influenced by the state of
the door structure.
• Before fitting the motor, remove any superfluous ropes or chains and disable
any unnecessary appliances.
50
BOTTICELLI SMART BT A 850-1250
D813948 03A00_04
