SECTION 3
ASSEMBLING FUEL-BED AND COMMISSIONING
3.1
ASSEMBLING THE FUEL-BED - Coal Fuelbed Model
a)
a) Place the fuelbed base centrally on to the fuelbed support and push
fully backwards to the rear face of the cast iron back panel, ensuring
the locating groove in the fuel-bed fits onto the raised channel in the
fuel-bed support as shown in Fig 6.
Make sure that the fuelbed base is located centrally on the burner
tray.
See Fig. 5 below.
Fig. 5
b)
Locating groove in fuel-bed base fits onto raised channel in metal
fuel-bed support.
Fig. 6
13
Metal Fuel-bed
Support
Locating groove in
fuel-bed base
