2.4.5
Re-assemble electrics cover, fan assembly and fan rear duct in reverse
order.
2.4.6
Route lamp wiring up to surround shelf infill level ensuring that the
wiring is kept clear of hot surfaces.
2.4.7
Fit the surround up to the point of the shelf infill (refer to section 2.6)
2.4.8
The surround lamp assemblies are then fitted to the surround using the
two nuts provided, as shown in figure 20 below.
2.4.9
Fit the bulbs provided in the loose items pack as shown below in figure
19, then finally fit the surround shelf.
Fig. 19
Shown from
rear for clarity
Lamp assemblies
Bulbs
20