BFI Automation 3016, Original Operating Instructions

Page: 21 / 56

Technical data
3-1
3 Technical data
3.1 General characteristic features
•
Self-control to verify flawless
function of the device in
keeping with European
standard EN 298
•
Short switch off time
•
Failure output
•
Two externally selectable sensitivity levels
•
Relay output for sensitivity II active
•
Fully electronic construction
•
Tested by the German Technical Inspection Association
TÜV
•
Approved of by DIN DVGW
3.2 Electrical system, mechanical system,
function
Item Value
Power supply 24 V DC
Consumption approx. 150 mA
Preliminary fuse, built in 0,5 A, time lag
Operating temperature 0…+60 degrees
Intensity display 10-segments, LED bargraph
Status displays LED, yellow for flame relay
LEDs, green for sensitivity level
LED, red for failure
Failur display coded upper 5 LEDs from bar graph for
failure indication
Module failure detection yes, output over relay contact
Sensitivity switching Via external signal, 24V DC approx.
40mA or DIP switch S1.1