9
Make sure that the water supply installation is connected to drinkable water
supply with operating pressure ranging from 0 to 6 bar.
Should the pressure be above 6 bar, provide a reducer.
Provide an intercepting tap upstream the machine connection.
A nipple G 3/8 " is already provided for the water supply connection.
Warning: Do not turn on for any reason the threaded tap and the boiler
drain cock housed near the water supply nipple; danger of burns.
Connect a rubber pipe with inner diameter of 17 mm to the provided connector
of the machine drain well and join the open drain-trap, previously prepared.
Connect the machine as shown in the illustration 2.
Fig. 2 - Deconcentrator connection
For use and maintenance, refer to the deconcentrator instructions enclosed
to this booklet.
4.2.2 Water Supply Connection
4.2.3 Drain Connection
4.3
Deconcentrator Instructions
Machine water supply connection
Drinkable water supply
connection
