8
The installation must be carried out by qualified operators according to
manufacturer’s instructions and laws in force.
Put the machine on a plane surface with sizes and solidity suitable to overall
dimensions of the equipment.
The machine is electrically powered and requires for its operating:
- power supply connection
- water supply connection
- drain system connection.
Warning:
-
The power supply connection must be carried out by qualified
personnel.
-
The installation must be carried out in compliance with the laws in
force and must be equipped with proper grounding.
The machine is supplied with power cable without plug; cable terminals shall be
connected to an omnipolar switch with a minimum opening of 3 mm.
On request, the machine can be supplied with cable-plug :
- mono/three-phase up to 3000 W with socket 16 Ampere according to EEC
regulations
- three-phase above 3000 W with special five-ended plug.
CHAPTER 4
MACHINE INSTALLATION
4.1 Warning
4.2 Installation Presetting
4.2.1 Power Supply Connection
