User Manual for Internet-Enabled Digital Fram
e
5
Note:
①
Take care not to turn off Power Switch button during charging
IV. Start Your Internet-Enabled Digital Frame
Turning On/Off
Cold Start:
For the initial use, switch the Power button to
“
ON
”
to turn on Digital Frame.
Warm Start:
When Power button being switched to ON, press and hold
for 2 seconds to start
the device. It
’
s recommended to turn on Digital Frame by warm Start
Cold Close-down:
Switch the Power button to
“
OFF
”
. It
’
s recommended not to cold close-down
your Digital Frame unless it would not be in use for long period.
(Refer to Note)
Warm Close-down:
press Menu button
to access the SETUP menu; then refer to following
instructions to finish setting:
_
1.
Select
“
Power Off
”
by pressing
.
2.
Select
“
Yes
”
by pressing
Note:
When Power button being switched to
“
OFF
”
, the Digital Frame would power off and all the
function settings (eg. time, alarm, language and auto sleep.
etc
.) have been reset to default
settings.
About SETUP Menu
All the function settings for the Internet-Enabled Digital Frame are controlled via the buttons
located on top of the Frame. Press the
button to enter SETUP menu and refer to following
Menu table before setting your Digital Frame
Menu Items
Sub-Menus
Description
Auto Scroll
Slide show mode
Photo Frame
Manual Scroll
View one image at a time
Off
30 Seconds
1 Minute
3 Minutes
Auto Sleep
5 Minutes
Enable or disable the timer
