10
Notice
•
Please be careful to use the device, keep it stable avoid hit.
• Measurement can’t be proceeded without the complete Insertion of the plug.
3.1.2 Insert the file clip and lip hook respectively into
the two socket of the measuring line (Pic 7).
Notice
Be sure not to pull the wire when inserting or pulling out of
the measuring wire and the file clip picture 8 (a),correct
operation showed as picture 8 (b).
Picture 7
Picture 8 (a)
Picture 8 (b)
Picture 9
3.1.3 Test the wire connecting before use.
• Turn on the unit (not demo mode), confirm that Bluetooth connection is not
established.
• Make sure the measuring line inserting into the USB interface and well connected
with the file clip and lip hook.
• Make the lip hook touch the file clip (Pic 9), when this signal appears on the
screen and stable, the connection is normal, or else that file clip or measuring line
is damaged, must be replaced.
3. Installation
3.1 Connect the measurement line
3.1.1 Insert the plug of the measuring line into the right side USB socket of the unit.
