Nominal deviation . . . . . . . . . . . . 50 kHz
Radiated transmitter power. . . . . max. 50 mW (output power)
Compander system. . . . . . . . . . . . LN compander
S/N ratio . . . . . . . . . . . . . . . . . . . . > 100 dB (A)
T.H.D. . . . . . . . . . . . . . . . . . . . . . .
"
1% at max. SPL
Transmission range. . . . . . . . . . . . 70 to 18,000 Hz
Max. SPL . . . . . . . . . . . . . . . . . . . . approx. 145 dB (A) at close miking
Battery supply . . . . . . . . . . . . . . . 9 V alkaline battery or rechargeable battery, at least 6 V,
flashing LED at 6,5 V
Current consumption . . . . . . . . . . approx. 50 mA
Operating time . . . . . . . . . . . . . . > 10 h with 9 V alkaline battery
approx. 2.5 h with NiMH rechargeable battery
Dimensions (with mic head). . . . . length:
240 mm
shaft Ø:
29/33 mm
Weight . . . . . . . . . . . . . . . . . . . . . 170 g
TS 500 Beltpack Transmitter
Carrier frequencies. . . . . . . . . . . . 16 frequencies switchable in the 798 - 814 MHz frequency
range, further frequencies upon request
Modulation . . . . . . . . . . . . . . . . . wideband, preemphasis 50 µs
Nominal deviation . . . . . . . . . . . . 50 kHz
Transmitter power . . . . . . . . . . . . approx. 50 mW (output power)
Compander system. . . . . . . . . . . . LN-compander
S/N ratio . . . . . . . . . . . . . . . . . . . . > 100 dB (A)
T.H.D. . . . . . . . . . . . . . . . . . . . . . .
"
1% at max. SPL
Frequency response . . . . . . . . . . . 50 Hz to 18,000 Hz
Sensitivity . . . . . . . . . . . . . . . . . . . automatic switching
for instruments approx. 1200 mV / 300 mV
for microphones 200 mV / 50 mV
Power supply . . . . . . . . . . . . . . . . 9 V alkaline battery or NiMH rechargeable battery,
at least 6 V, flashing LED at 6.5 V
Current consumption . . . . . . . . . . 45 mA
Operating time . . . . . . . . . . . . . . with 9 V alkaline battery > 10 h
with NiMH rechargeable battery approx. 2.5 h
Dimensions (H x W x D) . . . . . . . . 80 x 60 x 21.5 mm
Weight . . . . . . . . . . . . . . . . . . . . . 80 g
Connection Lemo socket:
Pin 1
= 0
V
Pin 2
= stability voltage 6 V DC
Pin 3
= audio input with DC for electret condenser
microphones (2-pole connection)
Pin 4
= audio input, without DC for electret condenser
microphones (3-pole connection),
dynamic microphones, instruments
49
(Top view)
2
1
3
4
