How to adjust the headband
Before wearing the Aventho wired for the first time you should adjust it
properly to achieve the best sound and ambient noise attenuation.
Please refer to the following tips:
• Select the appropriate lock-in position on both sides of the headband.
• Adjust the angle of the ear pads.
• Place the Aventho wired centrally on your ears as shown in the middle
picture.
e
n
g
li
s
h
Aventho wired – Headphones
5
Storage and removal from the packaging
Removal from the packaging
Hold the Aventho wired on the head-
band and pull it out of the textile
bag. Rotate the two ear cups inward
so that the ear pads are facing each
other. Refer to the illustration.
Storage
Disconnect the cable from the ear
cups. Rotate the two ear cups as
indicated by the arrows. Hold the
Aventho wired and put it into the
textile bag with the ear cups first.
Refer to the illustration.
Headphone is too
high
Perfect fit of the
headphone
Headphone is too
low
