BEWATOR COTAG 4101-2, Installation Handbook, Page: 13 / 158

1-1
Chapter 1
Introduction
Who should read this handbook
Anyone who needs to understand the Access Control System
hardware so they can configure and install systems.
What the chapters describe
Chapter 2 is a general description of access control in general and the
system which uses 4101-2 Controllers in particular.
Chapters 3 to 12 describe the modular Controller and its modules.
Chapter 13 describes the cables you should use to wire up the
system.
Chapter 14 describes the different types of antenna you can use for
hands free and proximity reading of Cotag Cards.
Chapter 15 describes how to connect earths and screens so that the
system complies with international PTT and EMC regulations.
Chapter 16 describes how to get the system working after
installation.
Chapter 17 gives a guide to simple fault finding on the access control
system.
Appendix 1 shows wiring diagrams for connecting the system up.
Appendix 2 describes how to program Cotag cards and tags for use
with the access control system.
Appendix 3 describes how to connect anti-passback on a single door.