Chapter 5. Setting Up the Wired Connection for Windows 7
N6603 Installation User Manual
29
Click the
[OK]
button to save the changes.
5.3. Accessing the IP Camera
There are three ways to access this IP camera:
Using
“BEWARD IP Installer”
software;
Using the
[Network]
menu in Windows 7;
Using Internet Explorer browser.
IMPORTANT!
When connecting the camera, take notice that the camera’s default IP address is 192.168.0.99.
5
.3.1. Installing “BEWARD IP Installer” Software
Insert the supplied CD into your CD-ROM drive. You will see the installation menu (
Pic.
5.19
).
To start the installation, select
“BEWARD IP Installer”
and follow the instructions of the
installation wizard until the installation ends.
Pic. 5.19
5.3.2. Accessing the IP Camera Using “BEWARD IP Installer” Software
IMPORTANT!
To access the IP camera using
“BEWARD IP Installer”
software, you need to enable UPnP for both your
computer and the IP camera. UPnP is enabled by default in Windows 7.
Summary of Contents for N35110
Page 1: ...IR LEDs built in ...