background image

4

•  Danger of strangulation due to excessively long cables.

•  Protect the unit from strong impacts.

•  Do not pull the mains part out of the socket using the mains cable.

•  If the mains part or its housing is damaged, this must be replaced by customer services or the retailer, as 

a special tool is needed for repair.

•  Disconnection from the power supply network is only guaranteed when the mains part is unplugged.

•  Do not use the device in the presence of flammable anaesthetic gas connections with air, oxygen or nitro-

gen oxide.

•  No calibration and no preventative checks or maintenance is to be carried out on this device. 

•  You cannot repair the device. The device contains no parts that you can repair. 

•  Do not make any changes to the device without the manufacturer’s permission. 

•  If the device has been changed, thorough tests and checks must be carried out to ensure the continued 

safety of further use of the device.

•  Do not position the device in a location where it is difficult to disconnect it from the mains supply.

•  Check the device before each use. Do not use the device if it is damaged in any way.

  The continuous use of a damaged unit can be dangerous and may cause injury or improper results.

•  The main material of the case is made of PC/ABS. Be cautious of potential allergic reactions to these ma-

terials.

General notes
 Important

•  If you are taking medication such as pain relievers, antihypertensives or antidepressants, consult your 

doctor before using the daylight therapy lamp.

•  People with retinal diseases as well as diabetics need to be examined by an ophthalmologist before be-

ginning to use the daylight therapy lamp.

•  Please do not use if you have an eye disease such as cataracts, glaucoma, diseases of the optic nerve in 

general and inflammation of the vitreous humour.

•  If you have health concerns of any kind, contact your general practitioner!

•  Before you use the unit for the first time, remove all packaging materials.

•  The lamp tubes are excluded from the warranty.

Repairs
 Important

•   Do not open the device. Please do not attempt to repair the unit yourself. This could result in serious inju-

ries. Failure to observe this regulation shall void the warranty.

•  If you need to have the unit repaired, contact customer service or an authorised dealer.

4. Unit description

Overview

1.  Fluorescent screen

2.    Rear of the device housing

3.  On/Off button

4.    Mains part connector

5.  Timer adjustment „- / +“

6.    Timer LED display

7.    Brightness adjustment (dimmer)

+

+

1

5

6

7

3

2

4

Summary of Contents for TL 70













Reviews: