12
9. Cleaning and maintenance
WARNING
Before beginning cleaning, pull the mains adapter out of the socket!
• Carefully clean the bottom of the device interior with a damp cloth after each use�
• Do not use any cleaning agents or solvents�
10. What if there are problems?
Problem
Possible cause
Solution
Nail dryer cannot be
switched on�
Mains adapter not plugged in
Plug the mains adapter into the socket�
Check that the female connector is positioned
correctly�
Female connector not inserted
No voltage at mains socket
Check your fusebox�
UV/LED nail gel
does not set�
Set application duration too
short
Set a longer application duration on the nail
dryer� Set the application duration according to
the recommended setting time of the UV/LED
nail gel manufacturer�
11. Disposal
For environmental reasons, do not dispose of the device in the household waste at the end of its useful life�
Dispose of the device at a suitable local collection or recycling point� Dispose of the device in ac-
cordance with EC Directive – WEEE (Waste Electrical and Electronic Equipment)�
If you have any questions, please contact the local authorities responsible for waste disposal�
12. Technical specifications
Model
MP 48
Dimensions
L 18�9 x W 16�5 x H 7�6 cm
Weight
approx� 330 g
Power supply
100-240 V~, 50/60 Hz
Light source wavelength range 365 - 395 nm
Device input
24 V
1 A
Voltage supply
Input: 100-240 V~, 50-60 Hz, 0�7 A
Output: 24�0 V
1�0 A, 24�0 W
Average active efficiency
≥ 87�94 %
No-load power consumption
≤ 0�09 W
Subject to technical changes
13. Warranty / service
Beurer GmbH, Söflinger Straße 218, 89077 Ulm, Germany (hereinafter referred to as “Beurer”) provides a
warranty for this product, subject to the requirements below and to the extent described as follows.
The warranty conditions below shall not affect the seller’s statutory warranty obligations which
ensue from the sales agreement with the buyer.
The warranty shall apply without prejudice to any mandatory statutory provisions on liability.
Beurer guarantees the perfect functionality and completeness of this product.
Summary of Contents for MP 48
Page 51: ...51 ...
