Beurer LB 27, Instructions For Use Manual

Page: 6 / 24

6
8. Troubleshooting Guide
Problem Cause Solution
Power LED does not
illuminate
Power Cord not getting power Connect the power cord to a working
electrical outlet
Power LED illuminates
red
Water level is too low Fill Water Reservoir
No mist Water level is too low Fill Water Reservoir
No power Connect the power cord to a working
electrical outlet
Mist has strange smell Device is new Clean Water Reservoir and let dry. Add
clean, fresh water
Water is not fresh
Strange noise Water Reservoir positioned incor-
rectly on the Base
Remove and reposition Water Reservoir
correctly on the Base
Water level is too low Fill Water Reservoir
Device is not level Place device on a firm, level surface
Mist escapes underneath
Water Reservoir
Water Reservoir positioned
incorrectly on the Base
Mineral deposits prevent proper
attachment of Water Reservoir to
Base
Remove and reposition Water Reservoir
correctly on Base
Inspect attachment between Base and
Water Reservoir for debris or mineral
deposits and clean if required
9. Specifications
Type LB 27
Power Supply 110-120 V / 50-60 Hz
Wattage 20 W
Capacity approx. 0.8 gal (3 l)
Evaporation output 6 fl oz (180 ml) /hour
Sound Level approx. 35dB
The specifications are subject to change without notice for purpose of improvement.
10. FCC Compliance Information
Cool Mist Humidifier LB 27
Responsible Party – U.S. Contact Information:
Beurer North America LP
1 Oakwood Boulevard, Suite 255
Hollywood, FL 33020
United States
1-800-536-0366
info@beurer.com