Beurer JBY 52, Instructions For Use Manual

Page: 11 / 48

11
5. Device description
Overview
Lifter 12
Lid 13
Mains cable 14
MIN/MAX display 15
Control panel 16
Power LED 17
Heat LED 18
Time/Temperature display 19
Button for setting time and/ 20
or temperature
On/Off button
21
Rapid heat-up button 22
1
6
5
9
8
4
2
7
10
3
11
6. Getting started
Before use, ensure that the device and accessories (including mains cable) do not have any 1.
visible damage.
Place the device on a fi rm, even surface.
2.
Connect the mains plug to the socket. The power LED lights up. The device is ready for use. 3.
7. Operation
Warming up baby food/drinks and keeping them warm:
Place the lifter in the baby food warmer and place the bottle or jar in the lifter. .
Fill the container with suffi cient water depending on the size of the jar. Ensure that the water 2.
does not overfl ow.
Starting the warming process:
Press button . followed by the rapid heat-up button .
The warming time that is currently set now fl ashes on the display. On fi rst use, the default
setting of 15 minutes is displayed. If the device remains plugged in after the fi rst use, it
shows the last entered warming time when subsequently used.
Enter the warming time (3 - 18 minutes). To do so, press the
2. button repeatedly until you
have reached the desired warming time. The time is entered in minute increments; after “18”,
the display begins again at “3”.
The warming time is dependent on the initial temperature, the type and quantity of
food/drink, the container material (glass/plastic) and the temperature of the water
used to fi ll the device. The following table off ers a guide to selecting the warming time
for food/drinks to be warmed to 37°C.
Duration
100 ml milk/chilled ~ 8 min.
250 ml milk/chilled ~ 14 min.
190 g puréed food/room temperature ~ 8 min.