6. Initial use
Inserting the batteries
• R emove the battery compartment lid on the rear of the device.
• Insert four 1.5 V AAA (alkaline type LR03) batteries. Make sure that the batter
-
ies are inserted the correct way round.
• C lose the battery compartment lid again carefully.
• All display elements are briefly displayed,
flashes in the display. Set the
date and time as described below.
If the battery replacement symbol
is permanently displayed, you can no longer perform any measure
-
ments and must replace all batteries. Once the batteries have been removed from the device, the date and
time must be set again. Any saved measurements are retained.
Making settings
You must make sure that the device has the correct settings before use in order to be able to make full use of
all functions. Only by doing so can your measurements with associated date and time be saved and accessed
later by you.
Set the hour format, date, time and
Bluetooth
®
settings
It is essential to set the date and time. Otherwise, you will not be able to save your measured values correctly
with a date and time and access them again later.
• B efore initial us e and after each tim e you replace the ba ttery:
• When inserting batteries into the device, you will be taken to the relevant menu automatically.
• If the batteri es have already been inserted:
• Press and hold the memory button
M
on the device when
for approx. 5 seconds.
In this menu you can adjust the following settings in succession:
Hour format
➔
Date
➔
Time
➔
Bluetooth
®
➔
User
Hour
format
The hour format now flashes on the display.
• Using the
+/-
setting buttons, select your desired hour format and confirm with the
M
memory button.
Dat
e
The year flashes on the display .
• Using the
+/-
setting buttons, select your desired number for the year and confirm with
the
M
memory button.
The month flashes on the display .
• Using the
+/-
setting buttons, select your desired month and confirm with the
M
memory
button.
The day flashes on the display .
• Using the
+/-
setting buttons, select your desired day and confirm with the
M
memory
button.
