Beurer BM 54, Instructions For Use Manual

Page: 26 / 148

26
6.2 Setting the hour format, date, time and Bluetooth
®
It is essential that you set the date and time. Otherwise, you will
not be able to save your measured values correctly with a date
and time and access them again later.
There are two different ways to access the menu from which
you can adjust the settings:
• Before initial use and after each time you replace the battery:
When inserting batteries into the device, you will be taken to
the relevant menu automatically.
• If the batteries have already been inserted:
With the device switched off , press and hold the START/
STOP button for approx. 5 seconds.
In this menu you can adjust the following settings in succession:
Hour format
➔
Date
➔
Time
➔
Bluetooth
®
Hour format
The hour format flashes on the display.
• Select the desired hour format using the M1/
M2 memory buttons and confirm with the
START/STOP button .
If you press and hold the M1 or M2 me-
mory button, you can set the values more
quickly.
Dat
e
The year flashes on the display.
• Select the year using the M1/M2 memory
buttons and confirm with the START/STOP
button .
The month flashes on the display.
• Select the month using the M1/M2 memory
buttons and confirm with the START/STOP
button .
The day flashes on the display.
• Select the current day using the M1/M2 me-
mory buttons and confirm with the START/
STOP button .
If you have set the 12h hour format, the month is dis-
played before the day.
Time
The hours flash on the display.
• Select the current hours using the M1/
M2 memory buttons and confirm with the
START/STOP button .
Time
The minutes flash on the display.
• Select the current minutes using the M1/
M2 memory buttons and confirm with the
START/STOP button .