33
• You have 2 memories, each with 60 memory spaces to store
the measurements of 2 different people separately.
Performing the blood pressure measurement
• As described above, attach the cuff and adopt the posture
in which you want to perform the measurement.
• Start the blood pressure monitor with the
START/STOP
button . All displays will illuminate briefly.
• The memory space that will be used is displayed.
• The cuff automatically inflates. The cuff’s air pressure is
slowly released. If you already recognise a tendency for high
blood pressure, you should reinflate the cuff and increase
the cuff’s pressure again. As soon as a pulse is found, the
pulse symbol is displayed.
• Systolic pressure, diastolic pressure and pulse readings are
displayed.
You can cancel the measurement at any time by pressing
the
START/STOP
button .
•
Er
_ appears if the measurement could not be performed
properly. Observe the chapter on error messages/trouble-
shooting in these instructions for use and repeat the meas-
urement.
• The measurement is automatically stored.
• To switch off the device, press the
START/STOP
button
If you forget to turn off the unit, it will switch off automati-
cally after approx. 1 minute.
Wait at least 5 minutes before taking another measurement.
6. Evaluating results
Cardiac arrhythmia:
This device can identify potential disruptions of the heart
rhythm when measuring and if necessary, indicates this after
the measurement with the symbol
. This can be an indica-
tor for arrhythmia. Arrhythmia is an illness in which the heart
rhythm is abnormal because of flaws in the bioelectrical sys-
tem that regulates the heartbeat. The symptoms (skipped or
premature heart beats, pulse being slow or too fast) can be
caused by factors such as heart disease, age, physical make-
up, excess stimulants, stress or lack of sleep. Arrhythmia can
only be determined through an examination by your doctor.
If the symbol
is shown on the display after the measure-
ment has been taken, repeat the measurement. Please ensure
that you rest for 5 minutes beforehand and do not speak or
move during the measurement. If the symbol
appears
frequently, please consult your doctor. Self-diagnosis and
treatment based on the measurements can be dangerous.
Always follow your GP’s instructions.