27
5
Connection for cuff
connector
6
Risk indicator
7
Connection for mains part
8
Function buttons
-/+
9
START/STOP
button
10
M
memory button
11
SET
button
Information on the display
12
Time and date
13
Systolic pressure
14
Diastolic pressure
15
Calculated pulse rate
16
Cardiac arrhythmia
symbol
Pulse symbol
17
Release air
18
Memory display:
average value ( ),
morning ( ), evening
( ), memory space
number
19
Battery replacement
symbol
20
Alarm function
21
Risk indicator
22
User memory
23
Cuff position control
24
Resting indicator
display
1
2
1
2
6. USAGE
6.1 Initial use
Inserting the batteries
• Remove the battery compartment cover on the back of
the device
A
.
• Insert four 1.5-V AA (alkaline type LR6) batteries. Insert
the batteries, making sure the polarity is correct accord-
ing to the label
A
.
• Close the battery compartment cover.
If the
symbol is displayed and does not disappear,
measurement is no longer possible. Replace all the batteries.
Once the batteries have been removed from the device, the
date and time must be set again. Any saved measured values
are retained.
Operation with the mains part
You can also operate this device with a mains part (not in-
cluded in delivery). However, before connecting the device
with the mains part, please ensure that you have removed
the batteries from the device. During mains operation, there
must not be any batteries in the battery compartment, as this
could damage the device.
• To avoid any potential damage, the device may only be
operated with a mains part that meets the specifications
described in the chapter “Technical specifications”.
• Furthermore, the mains part must only be connected to
the mains voltage that is specified on the type plate.
