29
Individual measur
ed values
When the relevant memory button (
M1
or
M2
) is pressed again, the last individual
measurement is displayed (in this example,
measurement 03).
When the relevant memory button (
M1
or
M2
) is pressed
again, you can view your individual measurements.
• To switch the device off again, press the START/STOP
button .
You can exit the menu at any time by pressing the
START/STOP
button .
Delet
e the measur
ed values
• To clear the memory of the relevant user memory, you
must first select a user memory.
• Start the retrieval of the average measured values.
A
flashes on the display and the average value of all
saved measured values in this user memory is dis-
played.
• Then press and hold the
M1
and
M2
memory buttons
for 5 seconds.
All the values in the current user memory are
deleted.
Deleting individual measur
ements
To clear individual measurements from the relevant user
memory, you must first select a user memory.
• Start the retrieval of the individual measured values.
• Press and hold the memory buttons
M1
and
M2
for
5 seconds.
• The selected value is deleted. The device briefly dis-
plays
CL 00
.
• If you would like to delete other values, repeat the pro-
cess described above.
You can switch off the device at any time by pressing the
START/STOP
button.
Transfer via
Bluetooth
®
low energy technology
It is also possible to transfer the measured values saved on
the device to your smartphone using
Bluetooth
®
low energy
technology.
You will need the “beurer HealthManager” app for this. The
app is available from the App Store.
Proceed as follows to transfer values:
If
Bluetooth
®
is activated in the settings menu, the data is
transferred automatically after the measurement. The symbol
appears in the top left of the display (see chapter 4 “Preparing
the measurement”).
