26
Measur
ement
•
EE
appears if the measurement could
not be performed properly (see chapter
10 “Error messages/troubleshooting”).
Repeat the measurement.
• Now select the desired user memory by pressing the
M1
or
M2
memory buttons. If you do not select a user
memory, the measurement is stored in the most re-
cently used user memory. The relevant or symbol
appears on the display.
• Press the
START/STOP
button to switch off the
blood pressure monitor. The measurement is then
stored in the selected user memory.
• If the device is not switched off manually, it will switch
off automatically after approx. 1 minute.
If
Bluetooth
®
data transfer
has been activated, data is
transferred after having confirmed the user memory and
pressing the
START/STOP
button .
• The
Bluetooth
®
symbol flashes on the display. The
blood pressure monitor now attempts to connect to the
app for approx. 30 seconds.
• The
Bluetooth
®
symbol stops flashing as soon as a
connection is established. All measurement data is
automatically transferred to the app. Once the data has
been successfully transferred, the device switches off.
If the data transfer was unsuccessful, “
EE7
” appears on
the display.
Measur
ement
• If a connection to the app cannot be established after
30 seconds, the
Bluetooth
®
symbol goes out and the
blood pressure monitor switches off automatically after
1 minute.
Please note that you must add the blood pressure
monitor in “My devices” in the “beurer HealthManag-
er” app to enable data transfers. The “beurer Health-
Manager” app must be active to allow data transfers.
If the latest data is not displayed on your smart-
phone, repeat the data transfer as described in
chapter 8.
If you forget to turn off the blood pressure monitor, it will
switch off automatically after a further 30 seconds. In
this case too, the value is stored in the selected or most
recent user memory and the data is transferred if
Blue-
tooth
®
data transfer has been activated.
• Wait at least 5 minutes before taking an-
other measurement.
6. Evaluating results
Cardiac arrhythmia:
This device can identify potential disruptions of the heart
rhythm when measuring and if necessary, indicates this after
the measurement with the symbol
.
This can be an indicator for arrhythmia. Arrhythmia is a con-
dition in which the heart rhythm is abnormal because of flaws
in the bioelectrical system that regulates the heartbeat. The
